Patton electronic 3088 user manual Opening the Case

ment) for connection to DCE such as a modem or multiplexer. When connecting the X.21 interface of the Model 3088/D to your DTE or DCE device, use an X.21 straight-through cable (See figure 8).

	DSL Span
Remote Model 3088)		Straight-Through 15-pin
		D-Sub Cable	Router (DTE)
			OR
			Mux (DCE)

Model 3088/D (DCE or DTE)

Figure 8. Connecting the Model 3088/D to X.21 DTE or DCE

To change the DCE/DTE orientation from the default position (DCE), you must open the case Model 3088/D case.

Opening the Case

To open the Model 3088/D case, insert a flat head screw driver into an open slot on both sides of the case, as in figure 9. Twist the screw driver head slightly and the top half of the case will separate from the lower half, as in figure 9. Be careful not to damage the PC-board

mounted components.

Figure 9. Opening the 3088 case with a small screwdriver

31