Patton electronic 3088 A.7 CONFIGURATION, A.8 POWER, A.9 COMPLIANCE, A.10 TRANSMISSION LINE

Term (Green)

The Term LED glows solid under the following circumstances:

•3088/CA with V.35 interface: If the serial interface has asserted DTR

•3088/D with the X.21 interface:

–Configured as DCE : Indicates that the “Control” signals have been asserted.

–Configured as DTE : Indicates that the “Indication” signals have been asserted

TM/ER (Red)

The Test Mode/Error (TM/ER) LED is used to indicate that a test mode is in progress or an error has been detected. It blinks once every second while a test mode is starting. It glows solid while a test mode is in progress. It blinks once if an error is detected either during a test mode, or in normal DSL operation.

A.7 CONFIGURATION

Externally accessible DIP switches or SNMP managed through 3096RC

A.8 POWER

5 VDC from external desk top power supply, 90-260VAC, 50-60 Hz (Uni- versal Input), 10W

A.9 COMPLIANCE

FCC Part 15, CE, ACTA (FCC Part 68): IC-CS03

A.10 TRANSMISSION LINE

Single Twisted Pair

A.11 LINE CODING

TC-PAM (Trellis Coded Pulse Amplitude Modulation)

A.12 LINE RATES (DSL LINE)

All nx64 rates from 64 kbps up to 4.6 Mbps

44