Patton electronic 3088 user manual Parameter, Description, Possible, Default, Values

The Model 3088 provides the following parameters for configuring the unit.

Parameter	Description	Possible	Default
		Values	Value
Password	The password used to login	Character	patton
	to the console.	strings 1–9
		characters
		long.
Circuit ID	The circuit ID used to identify	Character	Patton
	the unit.	string 1–64	Model
		characters	3088
		long.
Front Panel	If the unit is populated with	Enabled or	Enabled
Switches	front panel switches, they can	Disabled
	be used to start and stop test
	modes. If they are disabled,
	however, the front panel
	switch settings will be
	ignored.
DTE Loops	The V.35 interface can	Enabled or	Enabled
	request LALs and RDLs	Disabled
	using its RRDL and RLAL
	pins. If DTE loops are dis-
	abled, requests for loopbacks
	on these pins will be ignored.
TX Clock	The serial TX data can be	Normal or	Normal
	sampled on either the falling	Inverted
	edge (normal) or rising edge
	(inverted) of the TX clock.
Timeslots	The number of DSL timeslots.	1–72	4
	This controls both the DSL and
	the serial data rate. The data
	rate is calculated by the equa-
	tion: data rate = #timeslots x
	64k

9