Patton electronic 3088 user manual Rocketlink Plug ‘N’ Play

password: ******

>dsl clear errcntrs

>dsl show errcntrs

crc:0

losw: 0

tx fifo full: 0

tx fifo empty: 0

tx fifo slip: 0

tx stuff: 0

rx fifo full: 0

rx fifo empty: 0

rx fifo slip: 0

>logout

exiting remote console

>dsl set loopback rdl

>dsl set pattern 511e

>dsl show testmode ber status: in progress

errors: 42

time: 12

>dsl set pattern off

>dsl set loopback off

>logout

password:

4.4 ROCKETLINK PLUG ‘N’ PLAY

The RocketLink Plug ‘n’ Play feature allows ISPs, carriers and PTTs to quickly upgrade the link speed for a customer without requiring a visit to re-configure the Customer Premise (CP) Model 3088. This feature also allows service providers to set up all of the configurations at the Central Office (via the ForeFront AIS system) before installing the stand alone units, saving time spent configuring or re-configuring DIP switches.

Note RocketLink Plug ‘n’ Play is only available when using a Fore- Front Model 3096RC as the CO unit.

The RocketLink Plug ‘n’ Play feature allows the user to configure the DTE rate (bandwidth allocation, see Switches S1-1 through S1-7) of the CP unit via the ForeFront Model 3096RC at the Central Office (CO). The stand alone unit at the Customer Premise (CP) site will automatically configure itself to the DTE rate (Bandwidth Allocation) defined at the Model 3096RC. Other configuration parameters remain in the

default setting.

26