To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.
1.Press L or R until you see
SUPPLY
l Print Pos r
2.Press E. You will see the current setting, for example:
Enter print pos
3.Press L or R to change the print position. Pressing L decreases the value (moves the image down); R increases it (moves the image up).
4.Press E when the number you need appears. Press e twice to exit to the Main menu.
S u p p l y P o s i t i o n
This function adjusts how much supply feeds out of the exit chute. You may need to adjust the supply in or out to allow
utags and labels to be removed.
udie cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
Setting Supply Options
