Paxar 917 manual Print too far to the left Print too far to the right

Print too far to the left. Print too far to the right.

uIf the data is too close to the left side, increase the number.

uIf the data is too close to the right side, decrease the number.

Changing this setting only affects new

formats sent to the printer.

To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.

1.Press L or R until you see

SUPPLY

l Margin Pos r

2.Press E. You will see the current setting, for example:

Enter margin pos [-99/99]: +0

3.Press L or R to change the margin position. Pressing L decreases the value (moves the image toward the left side of the supply); R increases it (moves the image toward the right side of the supply).

Setting Supply Options 2-7