S p e e d
You can change the print speed for bar codes or graphics. If you select "default" for speed, formats with serial bar codes automatically print at 2.5IPS. Other formats print at 6.0IPS.
Refer to the following table for maximum print speeds for your printer.
Printer | Maximum Print Speed |
|
|
9835 | 6.0 ips |
9840 | 8.0 ips |
9850 | 10.0 ips (thermal direct only) |
| NOTE: 203 dpi serial bar codes with narrow elements |
| 3 dots (or greater) can be printed at 4.0 ips. For |
| additional high speed printing information, refer to your |
| 9850 Operator’s Handbook. |
|
|
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.
1.Press L or R until you see
SUPPLY
lSpeed
2.Press E to set the speed option. You will see the current setting, for example:
SPEED | r |
6.0 IPS |
3.Press L or R to see the other options. After you display the option you want, press E. Press e twice to exit to the Main menu.
