4.Press E when the number you need appears. Press ettwice to exit to the Main menu.
C u t P o s i t i o n
This function adjusts where the tag is cut. The printer adjusts the cut position according to the black marks on the supply. You may need to adjust for aperature supplies. Increase to move the cut up; decrease to move the cut down.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.
1.Press L or R until you see
SUPPLY
l Cut Pos r
2.Press E. You will see the current setting, for example:
Enter knife adj
3.Press L or R to change the cut position. Pressing L decreases the value (moves the cut down); R increases it (moves the cut up).
4.Press E when the number you need appears. Press etto exit to the Setup menu.
