S u p p l y Ty p e
You can print on aperture, black mark, die cut, or continuous supplies. You have to tell the printer which supplies you are using.
If you are using edge aperture supplies, use the die cut setting. If you are using center aperture supplies, use the aperture setting.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these steps.
1.Press L or R until you see
SUPPLY
l Supply Type r
2.Press E to set the supply type option. You will see the current setting, for example:
l | SUPPLY TYPE | r |
Black Mark |
3.Press L or R to see the other options. After you display the option you want, press E. Press e twice to exit to the Main menu.
Setting Supply Options
