6.Decide if you want to see this prompt in Batch Entry mode and press either L or R to display your selection. Press E. You will see
Number of parts
Default? No
7.Decide if you want to change the default setting of one (1) and press either L or R to display your selection. Press E. If you select "Yes," you will see
Number of parts [1/5]: +1
8.Select the number of parts to print across the supply by pressing R to increase the number or L to decrease the number. Press E. The range is one through five.
What you see next depends on if you have a knife installed. Without a knife, the next prompt you see is for Print Multiple. With a knife installed, you will see
Cut Option
Prompt? Yes
9.Decide if you want to see this prompt in Batch Entry mode and press either L or R to display your selection. Press E. You will see
Cut Option
Default? No
10.Decide if you want to change the default and press either L or R to display your selection. Press E. You will see
Cut Option
No
Setting Format Options
