ALARM UNIT CONFIGURATION

Follow these steps to configure a CM9760-ALM alarm unit.

NOTE: This programming is required only on the recorder that is physically connected to the CM9760-ALM.

1.Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears.

NOTE: You can also open the I/O Handler from the DX9000 Server Configuration Utility.

Figure 70. Alarm I/O Handler Configuration Dialog Box

2.Click Select Driver on Device 2 to define the external device that is connected to the recorder. The following dialog box appears.

Figure 71. CM9760 Alarm Driver Dialog Box

3.Select CM9760ALM.dll.

C636M-F (3/09)

59

Page 59
Image 59
Pelco C636M-F manual Alarm Unit Configuration, CM9760 Alarm Driver Dialog Box Select CM9760ALM.dll