Pelco C636M-F manual To install the unit into an equipment rack

To install the unit into an equipment rack:

1.Attach the two brackets to both sides of the unit.

2.Attach the mounting rails to the equipment rack.

3.Place the unit onto the mounting rails. It should slide in and out of the rack easily.

4.Fasten the rack ears to the equipment rack.

	(8) SCREWS,
REAR MOUNTING RAIL	10-32 X .375-INCH,
	FLAT HEAD
	(6) SCREWS,
FRONT MOUNTING RAIL	8-32 X .375-INCH,
	PAN HEAD WITH
	WASHERS
RACK

(4) SCREWS,

10-32 X .375-INCH FLAT HEAD

RECORDER/VIEWSTATION	BRACKET
	(SIDE VIEW)

(4)SCREWS, 10-32 X .750-INCH PHILLIPS, PAN HEAD WITH WASHERS

(6) SCREWS, 8-32 X .250-INCH PAN HEAD

RACK EAR

SLOTTED HOLES	TAPERED ENDS
TOWARDS FRONT
	TOWARDS REAR
OF UNIT
	OF UNIT

Figure 6. DX9100 Rack Mount Installation

18 C636M-F (3/09)