Pelco C636M-F manual Data Translator Configuration

DATA TRANSLATOR CONFIGURATION

Integrating a data translator serves two functions:

•Synchronize time between the DX9100 system and the matrix switcher.

•Send ASCII command strings to the matrix switcher (CM6800/CM9740/CM9760) for alarm conditions, such as sending alarms based on motion detection.

NOTE: This programming is required only on the recorder that is physically connected to the CM9760-DT.

Follow these steps to configure a data translator unit.

1.Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears.

NOTE: You can also open the I/O Handler from the DX9000 Server Configuration Utility.

Figure 86. Data Translator I/O Handler Configuration Dialog Box

2.Click Select Driver on Device 2 to define the external device driver that is connected to the server. The following dialog box appears.

Figure 87. CM9760 Data Translator Driver Dialog Box

3.Select CM9760DT.dll.

C636M-F (3/09) 71