Pelco C636M-F manual Relay Unit Configuration

RELAY UNIT CONFIGURATION

Follow these steps to configure a CM9760-REL relay unit.

NOTE: This programming is required only on the recorder that is physically connected to the CM9760-REL.

1.Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears.

NOTE: You can also open the I/O Handler from the DX9000 Server Configuration Utility.

Figure 78. Relay I/O Handler Dialog Box

2.Click Select Driver on Device 2 to define the external device driver that is connected to the server. The following dialog box appears.

Figure 79. CM9760 Relay Driver Dialog Box

3.Select CM9760REL.dll.

C636M-F (3/09) 65