SERVER STATE

The Server State utility checks the status of the recorders that are connected to the viewstation. It verifies if a recorder is recording, not recording, or unreachable. The Server State application should be running in the background all the time.

1.Go to Start > Programs > DX9000 Viewstation > Server State.

Figure 26. Server State

2.Select “All servers” to run the test on all recorders or “Server” to run the test on a specific recorder.

3.Click Configure.

34

C636M-F (3/09)

Page 34
Image 34
Pelco C636M-F manual Go to Start Programs DX9000 Viewstation Server State