Penpower duet 2 user manual Preparation for Card Scan, Calibration, Start-Up Wizard

Chapter 2 Getting Started 2-

2.3 Preparation for Card Scan

2.3.1 Calibration

After installing the software and drivers, your WorldCard scanner must be calibrated in order to ensure perfect results.

Place the calibration card into the scan- ner. Make sure the calibration card is flush with the mark to the side.

Note: To calibrate the A6-sized Color and A8-sized gray-scale scanner, insert the blank side of the card face down. To calibrate the A8-sized color scanner, insert the blank side of the card face up. In case the calibration card is lost, you can use any same size white card for calibration.

WorldCard duet 2 does not need calibration.

Tip: If there is any color indifference after scanning a card, you can calibrate the scanner by clicking Calibration on the Tool menu.

2.3.2 Start-Up Wizard

Start your WorldCard software by double-clicking the WorldCard shortcut on your desk- top. After the WorldCard program starts, the following screen will appear.

1. To start the wizard, click Next.