10 Hookups (cont’d)
Connecting to a TV Only
TV has only a single Antenna In or RF In jack
|
|
|
|
|
| 4 |
|
|
|
|
|
| Back of TV |
3 |
|
|
|
|
| (example only) |
|
| Back of RF Modulator |
| |||
|
|
| (example only) |
| ||
| ANT IN | TO TV | AUDIO | IN | VIDEO |
|
|
|
| L | R | IN |
|
|
|
|
|
| CH3 CH4 | ANTENNA IN |
|
|
|
|
|
| RF IN |
Antenna or |
|
|
|
| 5 |
|
|
Cable TV Signal |
|
|
|
|
|
|
|
|
| A |
|
|
| V |
|
|
| U |
|
|
| I | MAINS |
|
| D |
|
|
| D | |
|
| I |
|
|
| E | 120V ~ 60HZ |
L | R | COAXIAL O | VIDEO | Y | Pb | Pr O |
|
2 1
6
Make sure you have an RF modulator and RF coaxial cables (not supplied).
1Connect the supplied video cable (yellow) to the Player’s yellow VIDEO Out jack and to the VIDEO IN jack on the RF modulator. The VIDEO IN jack on the RF modulator may be yellow and may be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.
2Connect the supplied audio cable (white/red) to the Player’s left/right AUDIO Out jacks and to the AUDIO IN jacks on the RF modulator.
Audio jacks are white/red (left/right). Match cable colors to jack colors.
3If you already have an Antenna/Cable TV signal connected to the ANTENNA IN jack on your TV, disconnect it from the TV. Reconnect it to the
ANTENNA IN jack on your RF modulator.
4Connect an RF coaxial cable (not supplied) to the RF OUT,ANTEN- NA OUT, or TO TV jack on the RF modulator. The RF OUT jack may be labelled differently. Check your RF modulator’s manual. Connect the other end of the same RF coaxial cable to the ANTENNA IN or RF IN jack on your TV.
5Your RF Modulator has a Channel 3/4 switch, which determines the TV chan- nel on which you will watch materials playing on the DVD Player.
Set the Channel 3/4 switch to 3 or 4, whichever TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it accordingly. Check your RF modulator’s manual.
6Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the DVD Player.
7Connect the power cords of all the equipment to a power outlet.
8Turn on your TV and choose channel 3 or 4. Choose the same channel to which you set the RF Modulator’s Channel 3/4 switch.
9Turn on the DVD Player by pressing POWER. You should see the Player’s blue DVD screen on the TV (if no Disc is in the Player).
