Top/Front Panel 17
POWER Button
Press to turn the Player on or off.
IR (Infrared) Remote sensor
This sensor receives commands from the
Player’s remote control.Point the remote
here (not toward your TV).
Disc Compartment
Insert a Disc here.Load the
Disc with the label facing up
and the shiny side facing down.
If the Disc is two-sided,make
sure the label of the side you
want to play is facing up.
OPEN/CLOSE
Press to release the Disc com-
partment lid.
STANDBYand ON lights
The STANDBYlight will appear when the Player is in power-
saving Standby mode.You cannot use the Player,so it appears
to be “off.” When the Player is in Standby mode,you can
turn on the Player using POWER or PLAY on the remote.
The On light will appear when the Player’s power is On and
the Player is ready for use.It also appears during Disc play.It
flashes while the power is turning on.
The On light also blinks every time the Player receives a
command from the remote (every time you press an active
button).
PLAY/PAUSE button
Press to play a Disc.Press to pause play; press again to
resume play.
STOP button
Press once to stop Disc play.Play will resume from the same
point the next time you start play.See page 15.
Or,press STOP twice to stop Disc play.Play will resume from
the beginning of the Disc the next time you start play.