Philips DVP320F/17 owner manual Lpcm Output

42 LPCM Output

If you connected the Player to a Stereo using the COAXIAL jack as shown on page 14, adjust LPCM OUTPUT.

Discs are recorded in a certain sampling rate. The higher the sampling rate, the better the sound quali- ty. Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM OUTPUT to 96K if you are playing Discs recorded at this high rate. Otherwise, set LPCM OUTPUT to 48K.

1Press SYSTEM MENU.

2Press 2 to select the AUDIO SETUP

PAGE, then press OK.

3Press 4 to select DIGITAL AUDIO

SETUP, then press OK.

4Press 4 to select LPCM OUTPUT, then press 2.

5Press 3 or 4 to select 48K or 96K, then press OK.

6Press SYSTEM MENU to remove the menus.

1,6

2-5