14 Hookups (cont’d)
Connecting to a TV and a Stereo
(Stereo has Dolby DigitalTM or MPEG2)
Stereo
(example only)
Back of TV
(example only)
1 | LR |
COAXIAL
DIGITAL
VIDEO IN
AUDIO IN
| A |
|
|
|
| V |
|
| U |
|
|
|
| I | MAINS |
| D |
|
|
|
| D | |
| I |
|
|
|
| E | 120V ~ 60HZ |
COAXIAL | O | VIDEO | Y | Pb | Pr | O |
|
2
3
1Connect the Player’s COAXIAL Out jack to the Stereo’s COAXIAL DIGITAL AUDIO IN jack. Use a coaxial digital audio cable (not supplied). See your electronics retail- er for details and availability.
2Connect the supplied video cable to the Player’s yellow VIDEO Out jack and to the TV’s VIDEO IN jack. The supplied video cable has yellow markings.
3Connect the supplied power cord to the MAINS (AC Power) jack on the rear of the Player.
4Plug the power cords of the Player, Stereo, and TV into an active power outlet. Press POWER to turn on the Player.
5Turn on the Stereo and set it to the cor- rect Audio In channel or sound source. Refer to the Stereo owner’s manual for details.
6Turn on the TV. Set it to the correct Video
In channel. See your TV owner’s manual for details. Or, go to your lowest TV channel (01 or
02)and change channels down until you see the blue DVD screen on the TV.
Helpful Hints
•Set DIGITAL OUTPUT correctly. See page 41.
•The Stereo must sup- port MPEG2 or Dolby DigitalTM. Check the Stereo’s manual to be sure.
•To use the Y Pb Pr jacks for the video connection instead, see page 12.
