Digital Output 41

If you connected the Player to a Stereo using the COAXIAL jack as shown on page 14, adjust DIGI- TAL OUTPUT (audio) as described below. If you are not using the COAXIAL jack, no adjustment is necessary.

1Press SYSTEM MENU.

2Press 2 to select the AUDIO SETUP

PAGE, then press OK.

3Press 4 to select DIGITAL AUDIO

SETUP, then press OK.

4DIGITAL OUTPUT will be selected. Press 2. 5Press 3 or 4 to select ALL or PCM ONLY,

then press OK.

Choose ALL to select the original default audio settings as received by most Stereos.

If the sound is distorted, your Stereo may need to receive audio in the PCM format (pulse code modulation, contains only left and right audio sig- nals).

Choose PCM ONLY if your Stereo is PCM-com- patible or cannot decode MPEG-2 or DTS audio. Refer to your Stereo manual for details.

6Press SYSTEM MENU to remove the menus.

1,6

2-5

Page 41
Image 41
Philips DVP320F/17 owner manual Digital Output, Then press OK