12English

Nightlight

1Press the nightlight button Q to switch the nightlight on or off. (Fig. 26) When you run the baby unit on batteries, switch off the nightlight to save power.

Dial-up mode

In this mode, the baby unit calls a preprogrammed phone number if a sound is detected.You can also phone the phone number to which the baby unit is connected to check on your baby.

Setting the baby monitor up for dial-up mode

1Switch on the baby unit and the parent unit.

2Make sure that:

-the telephone cable supplied is connected to the phoneline-in socket of the baby unit.

-at least one telephone number is stored in the memory of the baby unit.

3Press the MODE button on the baby unit to set the unit to dial-up mode. (Fig. 15)

Note:If Ç lights up on the display, there is no connection to the telephone network. Follow the steps in ‘Preparing the baby monitor for dial-up mode’ to establish a connection with the telephone network.

4Press the M (memory) button to select the telephone number. (Fig. 12)

-If you have used Quick Install to enter a telephone number in the memory, press M1.

-If you have programmed the baby unit with the PRG button, choose one of the telephone numbers stored in the memory (M1-M5).

5Push the SENSITIVITY slide to the desired microphone sensitivity level. (Fig. 21)

-See ‘Microphone sensitivity’ for instructions on how to set the microphone sensitivity of the baby unit.

Tip:We advise you to test the dial-up function before you leave by making a sound close to the baby unit. Of course, this is easiest when you have programmed your mobile phone number.

Answering a call of the baby monitor

When the baby unit picks up a sound, it calls the preprogrammed telephone number after the preset sensitivity time. If the call is not answered, the baby unit calls again after 1 minute.

1Answer the phone to listen to your baby.

2Press the # button on the telephone to talk to your baby.

-After 3 minutes, the baby unit disconnects.

3Press the * button on the telephone or hang up to disconnect.

If the baby unit detects a sound again, it calls the preprogrammed telephone number again.

Calling the baby monitor to check on your baby

Note:To call the baby unit, use a tone-dial telephone with a keypad.This function does not work on pulse- dial telephones and on telephones with a dial.

1Dial the number of the telephone line the baby unit is connected to.

,After 3 rings, the baby unit is activated and asks you to enter your PIN code.

2Enter your PIN code with the numeric keys on the telephone.

,You can now hear your baby.

Note:If you enter the wrong PIN code three times, the baby unit disconnects.

3Press the # button on the telephone to talk to your baby.

-After 3 minutes, the baby unit disconnects.

4Press the * button on the telephone or hang up to disconnect.

Page 11 Page 13
Page 12
Image 12
Philips SCD 469 manual Nightlight, Dial-up mode, Setting the baby monitor up for dial-up mode
Page 11 Page 13

SCD 469 specifications

The Philips SCD 469 is a sophisticated baby monitor designed to provide parents with peace of mind and insight into their child's sleeping environment. Combining advanced technologies with user-friendly features, this device exemplifies what modern baby monitoring should be.

At the heart of the SCD 469 is its DECT technology, which provides clear audio transmission without interference from other devices. This ensures that parents can hear every little sound their baby makes, whether it’s a soft murmur or a full-blown cry, all while enjoying the reassurance of private communications. The DECT technology also enhances security, as it operates on a dedicated frequency, preventing eavesdropping by other electronic devices.

The monitor comes equipped with a range of features designed to enhance usability. A notable highlight is its range of up to 300 meters outdoors and 50 meters indoors, providing parents the freedom to move around their home without losing connection. The SCD 469 also includes a two-way communication feature, which allows parents to soothe their baby from another room with their voice, making it easier to comfort them without needing to enter the nursery.

Another significant characteristic of the Philips SCD 469 is its rechargeable battery in the parent unit. This gives a significant advantage—parents can move freely without being tethered to a power outlet. Additionally, the battery life indicator helps ensure that parents are aware of the battery status, so they are never caught off guard.

The monitor features a temperature sensor, allowing parents to track the nursery's climate. This is coupled with customizable audio and visual alerts, ensuring parents are informed if their baby’s environment is too warm or too cold. The night light and lullabies features provide additional comfort for babies, creating a calming atmosphere for sleep.

User-friendliness is another strong point of the Philips SCD 469. The simple interface, along with a clear and intuitive design, makes it easy to use, even for first-time parents. With its blend of audio clarity, robust range, and thoughtful features, the Philips SCD 469 stands out as a reliable companion for ensuring the safety and comfort of babies and peace of mind for parents. With its commitment to quality and functionality, Philips continues to be a trusted name in baby monitoring technology.
Top Page Image Contents