English

2Charger

3SYSTEM CHECK light

4Loudspeaker

5Sound level lights

6Antenna

7POWER light

8VOLUME control with off position

9CHANNEL selection slide

10Socket for small plug

11SYSTEM CHECK ALARM switch

12Battery compartment

13Battery compartment lid

14Adapter with small plug

Important

Read these instructions for use carefully before you use the appliance and save them for future reference.

,This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.

,Check if the voltage indicated on the adapter corresponds to the local mains voltage before you connect the appliance.

,The appliance is suitable for mains voltages from 220 to 240V.

,Except for the battery compartments, do not open the housing of the baby unit and parent unit to prevent electric shock.

,If the adapter of the baby unit or the parent unit is damaged, always have it replaced by one of the original type to avoid a hazard.

,If the charger of the parent unit is damaged, always have it replaced by one of the original type to avoid a hazard.

,Use and store the appliance at a temperature between 10°C and 40°C.

,Do not expose the baby monitor to extreme cold or heat or to direct sunlight. (Fig. 2)

,Make sure the baby unit and the cord are always out of reach of the baby (at least 1 metre/3 feet away).

,Do not place the baby unit inside the baby’s bed or playpen.

,Do not use the baby monitor in moist places or close to water.

,Do not cover the baby monitor with a towel or blanket.

,Do not immerse any part of the baby monitor in water or any other liquid.

,Always place batteries of the correct type in the baby unit to avoid the risk of explosion.

,Always replace the rechargeable battery pack of the parent unit with one of the correct type.

,Only use the adapter supplied to connect the baby unit to the mains.

,Only use the charger supplied to charge the parent unit.

,The adapters contain a transformer. Do not cut off the adapters to replace them with other plugs, as this will cause a hazardous situation.

,Since continuous transmission is prohibited, you only hear your baby when it makes sounds.

,The antenna of the parent unit is fixed. Do not pull at the antenna or bend it.

,The antenna of the baby unit can be pulled out and turned upwards.

Preparing for use

Baby unit

You can use the baby unit from the mains or on batteries. Even if you intend to use the unit from the mains, we advise you to insert batteries.This guarantees automatic back-up in case of mains failure.

Page 6 Page 8
Page 7
Image 7
Philips SCD 469 manual English, Preparing for use, Baby unit
Page 6 Page 8

SCD 469 specifications

The Philips SCD 469 is a sophisticated baby monitor designed to provide parents with peace of mind and insight into their child's sleeping environment. Combining advanced technologies with user-friendly features, this device exemplifies what modern baby monitoring should be.

At the heart of the SCD 469 is its DECT technology, which provides clear audio transmission without interference from other devices. This ensures that parents can hear every little sound their baby makes, whether it’s a soft murmur or a full-blown cry, all while enjoying the reassurance of private communications. The DECT technology also enhances security, as it operates on a dedicated frequency, preventing eavesdropping by other electronic devices.

The monitor comes equipped with a range of features designed to enhance usability. A notable highlight is its range of up to 300 meters outdoors and 50 meters indoors, providing parents the freedom to move around their home without losing connection. The SCD 469 also includes a two-way communication feature, which allows parents to soothe their baby from another room with their voice, making it easier to comfort them without needing to enter the nursery.

Another significant characteristic of the Philips SCD 469 is its rechargeable battery in the parent unit. This gives a significant advantage—parents can move freely without being tethered to a power outlet. Additionally, the battery life indicator helps ensure that parents are aware of the battery status, so they are never caught off guard.

The monitor features a temperature sensor, allowing parents to track the nursery's climate. This is coupled with customizable audio and visual alerts, ensuring parents are informed if their baby’s environment is too warm or too cold. The night light and lullabies features provide additional comfort for babies, creating a calming atmosphere for sleep.

User-friendliness is another strong point of the Philips SCD 469. The simple interface, along with a clear and intuitive design, makes it easy to use, even for first-time parents. With its blend of audio clarity, robust range, and thoughtful features, the Philips SCD 469 stands out as a reliable companion for ensuring the safety and comfort of babies and peace of mind for parents. With its commitment to quality and functionality, Philips continues to be a trusted name in baby monitoring technology.
Top Page Image Contents