Philips SCD 469 manual English, Question, Answer

18 English

Question	Answer
Why does the baby unit not	If the display shows Ç, you probably forgot to insert the
switch to dial-up mode?
	telephone cable in the appropriate socket or did not insert the
	cable properly. Insert the cable properly. If the baby unit is
	connected properly to the telephone line, the display shows Å.

Why does the baby unit fail to dial a telephone number?

Why does the baby unit not answer my call?

Why does the baby unit not dial the correct number?

Why does the baby unit not recognise the PIN code?

You did not select the dial-up mode. Use the MODE button to select dial-up mode.

Perhaps you did not insert the telephone cable properly into the phoneline-in socket of the baby unit. Insert the telephone cable. If the baby unit is connected properly to the telephone line, the display shows Å.

The sensitivity time is too long. Set a shorter sensitivity time. See ‘Preparing the baby monitor for dial-up mode’ in chapter ‘Preparing for use’. We advise you to test the dial-up mode before you leave.

You did not store a telephone number in the memory of the baby unit. Enter a telephone number and store it in one of the memory locations. See ‘Preparing for dial-up mode’ in chapter ‘Preparing for use’. We advise you to test the dial-up mode before you leave.

Perhaps you forgot to select a telephone number. Press the M (memory) button to select the appropriate memory location (M1-M5).

You probably try to phone the baby unit with a pulse dial telephone. Use a tone dial telephone or a mobile phone.

You did not enter the correct number or you selected the wrong memory location (M1-M5).

Your telephone network does not recognise dialling pulses. Set the TONE/PULSE selector to tone dialling or use a mobile phone.

Your telephone network uses pulse dialling, but the TONE/PULSE selector is set to tone dialling. Set the TONE/PULSE selector to pulse dialling or leave the TONE/PULSE selector in tone setting and use a mobile phone.

You entered the wrong PIN code. Redial and enter the correct code.

You did not store a PIN code in the memory of the baby unit. Enter a PIN code. See ‘Preparing for dial-up mode’ in chapter ‘Preparing for use’.

You use a pulse dial telephone. Use a mobile phone to phone the baby unit.

The telephone is in pulse dial mode. Set the telephone to tone dialling. Follow the instructions in the user manual of the telephone.