Phonetics 1108 user manual Special Dialing to a Beeper or Pager

Chapter 4: Communications Programming

5.	Position the pound (#) or asterisk (*) within the telephone
	number where required by pressing SET (where the pound is
	located) or WHAT IS (where the asterisk is located). The
	Model 1108 will “beep” each time pound or asterisk is
	pressed.
	–OR–
6.	Enter any remaining digits of the telephone number.
7.	Press ENTER. The Model 1108 will say “Enter.”
4.4.4 Special Dialing to a Beeper or Pager

The following example demonstrates just one solution to programming the Model 1108 for dialing to a beeper or pager. Many other key sequences will also work. Start with steps 1–3 below; next, enter special dialing keys where required for your beeper or pager service.

To incorporate a pound or asterisk:

1.Press SET.

2.Press PHONE NUMBER.

3.Press any unassigned number key (from 1 to 8) to represent the new telephone number entry.

47