Phonetics 1108 user manual Local, On-site

Sensaphone® Model 1108 User’s Manual

IV. The Alarm Is Acknowledged	Variable Factors
• At any time after a valid alarm is	Local, On-site
determined, the alarm may be
	Acknowledgment
acknowledged at the Model 1108’s
installation site, by pressing any key.
• When the Model 1108 dials out and the
call is answered via Touch-Tone
telephone, any alarm may be instantly	Touch-Tone
acknowledged by pressing “555.”
	Acknowledgment:
• If the alarm message repeats for the
	Fast Code 555
number of programmed Voice
Repetitions, and “555” has not been
entered, the Model 1108 will say:
“Indicate that you have received warning
message.”
The Model 1108 waits 10 seconds for the	Touch-Tone
Touch-Tone code “555” to be entered. If
	Acknowledgment:
the code is entered within 10 seconds, it
	Normal Code 555
responds:
Warning message received by telephone
number...(the dialed phone number).”
The alarm is considered acknowledged
and the dialout concludes.	Tone or Pulse
• If the Model 1108 does not receive the	Callback
Touch-Tone code within 10 seconds, it	Acknowledgment:
recites the following and then hangs up:	Within Intercall
“Dial telephone number (gives the Unit ID	Time
Number) within...(the programmed Intercall
Time.)”
The recipient of this message must call
the Model 1108 back within the period
programmed for Intercall Time, in order
to acknowledge the alarm. If Local Voice
Mute is off, the unit will beep at the
installation site while waiting for this
call.
• Callback: The Model 1108 waits 10 rings
before answering to guard against
random acknowledgment. If an

96