Chapter 2: Installation
Correctly installing the Model 1108 will ensure proper
functioning of the unit. Please read the entire chapter before
starting the installation process.
Within the packaging will be a Warranty Registration Card.
Please take the time to fill this out and mail. The One Year
Limited Warranty is explained in the back of this manual.
2.1 Operating Environment
The Model 1108 should be installed and operated in a clean, dry
area that provides space for wiring sensors to the screw terminals,
near an AC power source and telephone line. Operating
temperature ranges from 32° Fahrenheit (0°Celsius) to +120°
Fahrenheit (+49°Celsius).
NOTE
The Model 1108 is a sensitive electronic device. Do
not install the Model 1108 near strong electrostatic,
electromagnetic or radioactive fields. Do not expose
to humid environments, fumes, or corrosive vapors.
2.2 Mounting
Flat Mount: Place the Model 1108 on top of a desk or other
horizontal surface.
Wall Mount: Mount on a wall with two screws using the
keyholes on the back panel of the unit. Place the screws or bolts
313⁄16" apart at the desired height from the floor. Hook the unit over
the screws and toward the floor. Refer to Figure 2-1.
Figure 2-1. Wall Mount
21