Chapter 4: Communications Programming
This chapter explains the keypad commands for communications programming of the Model 1108, including interrogation and resetting of the following:
•The Unit ID Number
•
•Tone or Pulse Dialing
•Special Dialing with Pagers, Beepers and Access Numbers
•Rings Until Answer and Telephone Answering Device Compatibility
•
•Call Delay
•Local Voice Mute
•Voice Repetitions
•Intercall Time
•Maximum Number of Calls
•The Clock
•Security Code
4.1The Unit ID Number
The Unit ID Number is the identification number of the Model 1108. This number may be the same as the telephone number where the unit is installed, or it may be designated using any number that best suits your application.
The purpose of the Unit ID Number is to immediately provide the source of any alarm, especially when using multiple Model 1108 units in a complex monitoring system. When the Model 1108 is called from a remote location, it always begins its message with the identification number:
“Hello, this is telephone number (Unit ID Number).”
4.1.1 Programming the ID Number
To program the ID Number:
1.Press SET.
39
