Communications / Dial-out Problem Cause Solution

Communications / Dial-out:

Problem	Cause		Solution
1. The Model 1108 fails to dial out.	a)	The telephone number may be incorrectly	Recheck programming steps.
		programmed.	Refer to Chapter 4, Section 4.2.1.
	b)	Tone or pulse (the current dialing	Switch from the current setting: from tone to
		method) is not compatible with the	pulse, or from pulse to tone.
		telephone line on which the Model 1108	Refer to Chapter 4, Section 4.3.
		is installed.
	c)	Recognition Time is too long. An alert	Reprogram Recognition Time. Set the
		condition does not remain in effect long	Recognition Time to the minimum duration
		enough to become a valid alarm.	required to create a valid alarm. If possible,
			test the new setting by deliberately creating an
			alert condition.
			Refer to Chapter 5, Section 5.3.
	d)	Max Calls is set to zero.	Reprogram Max Calls. It is a good idea to set
			your Max Calls to at least equal the number of
			dial-out telephone numbers programmed.
			Refer to Chapter 4, Section 4.12.1.

117

Appendix B: Troubleshooting