4. Press ENTER. The Model 1108 will say“Enter.”
4.3 Tone or Pulse Dialing
The Model 1108 can dial out in pulse or Touch Tone. Select the
type of dialing, in either pulse or tone, depending upon the type of
service provided by your telephone company. The default is tone.
To program for either pulse or tone:
1. Press the SENSOR ON/OFF key.
2. Press TONE.
The Model 1108 will respond:“Off” to indicate that tone dialing
is off and pulse is enabled, or“On” to indicate that tone dialing is
on and pulse is disabled.
3. Repeat key sequence to switch between settings.
4.4 Special Dialing
The Model 1108 has provisions for special dialing sequences.
Special dialing sequences allow:
• Dialing that requires an access number to connect with an
outside line.
• Dialing that requires the pound (#) or asterisk (*).
• Dialing to a beeper or pager.
Chapter 4: Communications Programming
43