5.12 Exit Delay
When tripping an alarm is unavoidable, yet a true alert condition
has not actually occurred, the alarm response, including dial-out,
can be temporarily suppressed.
The Model 1108 is able to suppress and then reset its dial-out
function automatically through use of the Status Report. This is
especially convenient when an alert condition is created upon
exiting a monitored door, and there is no way to cancel from the
local keypad.
Example: You are planning to exit through a monitored door.
Prior to exiting, you initiate a Status Report recitation at the
Model 1108 keypad by pressing WHAT IS, followed by STATUS,
(key sequence shown below). This allows you approximately 30
seconds to exit without activating the Model 1108’s programmed
response to an alarm. At the conclusion of the status report,
normal alarm response is reactivated.
To use exit delay, initiate the Status Report.
1. Press WHAT IS.
2. Press STATUS. The Model 1108 recites the full Status Report;
during this time, you are able to exit the monitored area
without tripping an alarm.
Sensaphone®Model 1108 User’s Manual
84