Phonetics 1108 user manual Operation

	Chapter 7: Operation
III. Dial-out Begins	Variable Factors
• The dial-out process is activated as soon as	Call Delay:
the Call Delay time expires (if the alarm	Expired
has not been cancelled at the Model 1108’s
installation site.) The dial-out begins with
telephone number 1 and proceeds
sequentially, through the remaining
telephone numbers.
• If the alarm is not acknowledged with the	Intercall Time:
first dial-out telephone call, the Model	Activated
1108 waits the duration of Intercall Time
before dialing the next telephone number.
Intercall Time is the programmed waiting
period in between each dial-out telephone
call.
• When the telephone is answered, the	Voice Repetitions:
programmed Voice Repetitions determine	Activated
the number of times per call the Model
1108 recites the alarm message.
• Call Progress, an automatic feature,
enables the Model 1108 to detect whether	Call Progress:
or not the telephone call is answered. After	Activated
8 rings, or if a busy signal is encountered,
the Model 1108 will hang up, wait the
programmed Intercall Time, and proceed to
dial the next telephone number.
• If no telephone calls are answered, the	Max Calls:
Model 1108 dials out sequentially, through	Activated
the remaining telephone numbers and
continues to cycle until the programmed
Maximum Number of Calls is reached.
• When the telephone is answered, the	Alarm Messages:
	By Telephone
Model 1108 will immediately begin
	and
reciting a message that indicates which of
	On site
the inputs is in alarm. At the same time,
the alarm message is repeating at the
Model 1108’s installation site. The Model
1108 will request acknowledgment, if it
has not yet occurred.

95