05Controls and displays
5 VIR.SB
Lights during Virtual surround back processing (page 37).
6 DIRECT
Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.
7AUTO SURR.
Lights when the Auto Surround feature is switched on (see page 31).
8ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.
9 SLEEP
Lights when the receiver is in sleep mode (page 39).
10Tuner indicators
•
/ MONO – Lights when the mono mode is set using the MPX button.
•
/ STEREO – Lights when a stereo FM broadcast is being received in auto stereo mode.
•
/ TUNED – Lights when a broadcast is being received.
11EON 
EON lights when the EON mode is set, and flashes during reception of an EON
broadcast. The 
indicator lights when the current station carries the EON service (page 56).
RDS
Lights when an RDS broadcast is received (page 55).
28
12 Speaker indicator
Shows if the speaker system is on or not. SP A means the speakers are switched on. SP means the headphones are connected.
13Character display
14Neo:6 (VSX-515 model only)
When the (STANDARD) Neo:6 mode of the receiver is on, this lights to indicate Neo:6 processing.
15ADV.SURR. (Advanced Surround) Lights when one of the Advanced Surround modes has been selected.
16WMA9 Pro
17MIDNIGHT
Lights during Midnight listening (page 38).
18D.E.
Lights when Dialog Enhancement (DIALOG E) is switched on (page 38).
19 LOUDNESS
Lights during Loudness listening (page 38).
20 EX
Lights when a Dolby Digital Surround EX encoded signal is detected.
21 Master volume level
Shows the overall volume level.
Depending on your level settings for each channel, the maximum volume can range between
22MCACC channel EQ indicators (VSX-515 model only)
These indicators show the EQ balance for each channel when checking your Acoustic Calibration EQ settings. See Checking your Acoustic Calibration EQ settings on page 48 for more on this.
En
