Pioneer VSX-515-S/-K, VSX-415-S/-K Copying your Acoustic Calibration EQ settings, Manually

The System Setup menu 08

•A. CH – All Channel Adjust is a ‘flat’ setting where all the speakers are set individually so no special weighting is given to any one channel.

•F.ALG – Front Align Adjust balances the overall sound so that all speakers are set in accordance with the front speaker settings (no equalization is applied to the front left and right channels).

You will return to the Acoustic Cal EQ setup menu after the Acoustic Calibration Equalization is set.

Copying your Acoustic Calibration EQ settings

If you want to manually adjust the Acoustic Calibration EQ (see Setting the Acoustic Calibration EQ manually below), we recommend copying the A. CH or the F.ALG settings from the EQ A. SET setup above (or from Automatically setting up for surround sound (MCACC) on page 13) to one of the custom (C1 or C2) settings. Instead of just a flat EQ curve, this will give you a reference point from which to start.

1Select ‘EQ COPY’ from the Manual MCACC setup menu.

2 Use	(cursor left/right) to select C1
or C2 then use the		(cursor up/down)

buttons to select the setting you want to copy.

•You can also copy from one custom setting to another. For more on the A. CH and F.ALG settings, see Setting the Acoustic Calibration EQ automatically above.

3 Use	(cursor left/right) to select
‘COPY? YES’ to copy and confirm.
You can also use		(cursor up/down) to

select COPY? NO to cancel.

Setting the Acoustic Calibration EQ					English
manually
Before manually adjusting the Acoustic
Calibration EQ, we recommend copying the A.
CH or the F.ALG settings from the auto setup
above (or from Automatically setting up for
surround sound (MCACC) on page 13) to one of					Deutsch
which to start (see Copying your Acoustic
the custom settings. Instead of just a flat EQ
curve, this will give you a reference point from
Calibration EQ settings above for how to do
this).					Français
1 Select ‘C1 ADJ’ or ‘C2 ADJ’ from the
Manual MCACC setup menu.
2	Use	(cursor left/right) and ENTER to
select which method you want to use to
adjust the overall frequency balance.					Italiano
Calibration EQ settings above.
It is best to choose whichever one you copied
to the custom setting in Copying your Acoustic
	• A. CH ADJ – All the speakers can be set
	independently so no special weighting is				Nederlands
	given to any one channel. When adjusting,
	test tones will sound for each individual
	channel.
	• F.ALG ADJ – Speakers are set in
	accordance with the front speaker
	settings. The sound of the test tone will				Español
	alternate between the left front (reference)
	speaker and the target speaker.
3	Use	(cursor up/down) to select the
channel you want and adjust to your liking.
Use the		(cursor left/right) buttons to
select the frequency and				(cursor up/
down) to boost or cut the EQ. When you’re
finished, use the			(cursor left/right)
buttons to select the channel display (for
example R EQ for the right channel or SBR EQ
for the surround back right channel) then

(cursor up/down) to proceed to the next channel.

•The front speakers can’t be adjusted if you selected F.ALG ADJ.

47

En