IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.
IMPORTANT | The | Do not connect either wire to the earth terminal of a | ||
not be inserted into any 13 amp socket as this can | three pin plug. | |||
result in electric shock. The plug or adaptor or the | NOTE | |||
FOR USE IN THE UNITED | distribution panel should be provided with 5 A fuse. | |||
As the colours of the wires in the mains lead of this | After replacing or changing a fuse, the fuse cover in | |||
KINGDOM | ||||
appliance may not correspond with coloured | the plug must be replaced with a fuse cover which | |||
The wires in this mains lead are coloured in | markings identifying the terminals in your plug, | corresponds to the colour of the insert in the base | ||
accordance with the following code: | proceed as follows ; | of the plug or the word that is embossed on the | ||
Blue | : Neutral | The wire which is coloured blue must be connected | base of the plug, and the appliance must not be | |
Brown | : Live | to the terminal which is marked with the letter N or | used without a fuse cover. If lost replacement fuse | |
If the plug provided is unsuitable for your socket | coloured black. | covers can be obtained from your dealer. | ||
outlets, the plug must be cut off and a suitable plug | The wire which is coloured brown must be | Only 5 A fuses approved by B.S.I or A.S.T.A to | ||
fitted. |
| connected to the terminal which is marked with the | B.S.1362 should be used. | |
|
| letter L or coloured red. | ||
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.
WARNING
This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
WARNING
Before plugging in for the first time, read the following section carefully.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the rear panel.
Operating Environment
Operating environment temperature and humidity:
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC).
