Pioneer VSX-415-S/-K 02 5 minute guide, Play a DVD, and adjust the volume to your liking

025 minute guide

Front speakers		Center speaker		Surround speakers		Surround back speakers
L	R		C	LS	RS		SBL	SBR

R	AUDIO L
	FM UNBAL
	75 Ω
IN	CD
OUT	DVR/
	VCR
OPT IN	VIDEO
1	IN

AM

LOOP ANTENNA

CEN- SUB

TER WOOFER

RL

SURROUND

DVD 5.1CH INPUT

			TV /
(TV/SAT)		IN	SAT
			DVD	IN
			/LD
ASSIGNABLE	COAX	IN	FRONT	D V D
DIGITAL IN
	2		REC	5.1CH
	(CD)			INPUT
	COAX	OUT	CD-R	IN
			/ TAPE
	1		/ MD
	(DVD	IN	PLAY
	/LD)

OUT	S	R FRONT L	CENTER	R SURROUND BACK L	R SURROUND L
MONITOR	P
OUT	E
SUB	A			SINGLE
WOOFER	K			SEE INSTRUCTION
PREOUT				MANUAL
	E
	R
	S

VSX-515

	Single
Powered subwoofer	surround
SW	back
	speaker
INPUT

4Plug in the receiver and switch it on, followed by your DVD player, subwoofer and TV. Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with the TV if you don’t know how to do this.

Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input is selected. If it isn’t, press DVD on the remote control to set the receiver to the DVD input.

5Press QUICK SETUP on the front panel to specify your speaker setup, room size and listening position.

Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick Setup on page 11 if you’re unsure about the settings.

6Play a DVD, and adjust the volume to your liking.

There are several other sound options you can select. See Listening to your system on page 31 for

more on this.1 See also Choosing your receiver setup on page 40 (VSX-415) or The System Setup menu on page 44 (VSX-515) for more setup options.

Note

1Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the listening mode must be set to STANDARD (it should already be set—see Listening in surround sound on page 31 if you need to do this) if you want multichannel surround sound.

10

En