Pioneer VSX-515-S/-K Minute guide, English Deutsch Français Italiano, Connect your speakers

5 minute guide 02

3 Connect your speakers.

A complete setup of speakers is shown here (six speakers for the VSX-415, and eight for the VSX-

515), but home setups may vary. Simply connect the speakers you have as shown below.1 The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best.

Make sure you connect the speaker on the right to the right terminal and the speaker on the left to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver match those on the speakers. You can use speakers with a nominal impedance between 6–16Ω(please see Switching the speaker impedance on page 61 if you plan to use speakers with an impedance of less than 8Ω).

Front speakers		Center speaker		Surround speakers
L	R		C	LS	RS

English Deutsch Français Italiano

R	AUDIO	L
		FM UNBAL
		75 Ω
IN		CD
OUT		DVR/
		VCR
DIGITAL IN
IN		VIDEO
OPT

AM

LOOP ANTENNA

CENTER- SUB WOOFER

RL

SURROUND

DVD 5.1CH INPUT

Nederlands

1	IN
	TV /
(TV /	SAT
SAT)	IN
ASSIGNABLE COAX	IN
	DVD

2/LD

FRONTIN

(CD)		D V D
COAX	REC	5.1CH
		INPUT
1	CD-R	IN
(DVD OUT	/ TAPE
/LD)	/ MD
IN	PLAY

OUT	S	R FRONT L	CENTER	R SURROUND L
	P
MONITOR	E
OUT	A
SUB	K
WOOFER	E
PREOUT
	R
	S

Español

Powered subwoofer	VSX-415
SW

INPUT

Note

1VSX-415 model only

•If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 41) to large. VSX-515 model only

•If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 48) to LARGE.

•If you are using only one surround back speaker, connect the positive wire to the right channel (+) terminal, and the negative wire to the left channel (–) terminal as shown.

9

En