Pioneer VSX-415-S/-K, VSX-515-S/-K Dual Mono Setup, LFE Attenuator Setup, To separate channels.1

08The System Setup menu

•MAX – Dynamic range is reduced (loud sounds are reduced in volume while quieter sounds are increased).

3 When you're finished, press RETURN.

Dual Mono Setup

•Default setting: CH1

You can specify how dual mono encoded Dolby Digital soundtracks should be played. Dual mono is not widely used, but is sometimes necessary when two languages need to be sent

to separate channels.1

1Select DUAL MONO from the OTHER setup menu.

2 Use (cursor up/down) to choose the setting that you want.

•CH1 – Only channel 1 is played

•CH2 – Only channel 2 is played

•CH1 CH2 – Both channels are played through the front speakers

3 When you're finished, press RETURN.

LFE Attenuator Setup

• Default setting: ATT 0 dB

Some Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as necessary to prevent the ultra- low bass tones from distorting the sound from the speakers.

1Select LFE ATT from the OTHER setup menu.

2 Use (cursor up/down) to choose the setting that you want.

•LFEAT 0 – No limiting (recommended setting)

•LFEAT 10 – 10dB of limiting

•LFEAT ** – No sound from LFE channel

3 When you're finished, press RETURN.

Note

1 This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

52

En