09
MULTI CONTROL
DVD/LD | TV / SAT | VCR/DVR | TV CONT |
C D | TUNER | RECEIVER |
RECEIVER
3Use the number buttons to enter the 3 digit setup code (see page 72 for “Preset Code List”). The LED blinks again.
If the correct code has been input the power of the component being input will turn on or off.
The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control.
4Repeat steps 2 through 3 for the other components you want to control.
5When you’re done, press
RECEIVER.
•You can only input a code for the component type written on each MULTI CONTROL button (except RECEIVER and TUNER).
3Use los botones numéricos para escribir el código de configuración de 3 dígitos (véase la página 72: “Lista de códigos predefinidos”).
El LED vuelve a parpadear.
Si se ha introducido el código correcto, el componente se encenderá o apagará.
El componente se encenderá o apagará si se puede encender directamente desde el mando a distancia.
4Repita los pasos 2 a 3 pata el resto de los componentes que quiera controlar.
5Cuando haya acabado, presione RECEIVER.
Nota
•Sólo puede introducir un código para el tipo de componente escrito en cada botón MULTI CONTROL (excepto RECEIVER y TUNER).
3使用數字按鈕輸入 3 位數的設置 代碼(參閱第 72 頁的「預設代碼列 表」)。
LED 再次閃爍。
如果已輸入正確的代碼,則輸入設 備的電源將打開或關閉。僅當輸入 設備能夠由遙控器直接打開時,該 設備的電源才會打開或關閉。
4對於您要控制的其他設備,重複 步驟 2 至 3 。
5執行完畢後,按 RECEIVER 。
•您僅可輸入各個MULTI CONTROL 按鈕上所寫的設備 類型代碼(RECEIVER 和 TUNER 除外)。
64
En/Sp/ChH