Operation
Selecting an Account
If you’re using the meter’s accounting feature, you will have to select an account before you can print postage. The meter prompts “No Account Selected” as shown in the example:
£0.27
Date: 01.01.00
Ad: None
Acct: None
No Account Selected
If you know the number of the Account you want…
Simply key in the Account number, then press the Account key.
or, if you don’t know the number of the Account you want…
1.Press the Account key to see a list of accounts. If your meter has more than six accounts available, press the Account key repeatedly to see more.
2.Key in the account number you want.
3.Press Enter.
In either case, if no account password is needed, the display briefly shows the account you selected and returns to the Ready Screen.
The display prompts you if an account password is needed. If it is, key in the four- digit password and press Enter. The display shows the account you selected and returns to the Ready Screen.
Selecting a Value
You can set the postage value in one of four ways:
•Key in the postage value you want.
•Select the Normal Preset.
•Select a Custom Preset.
•Using a Pitney Bowes ‘N’ Series Postal Scale
Each method is explained below.
Keying In the Postage Value
At the Ready Screen, key in the postage value you want, followed by Enter.
When selecting values in pounds and pence, you don’t need to use the decimal
point. |
|
| Enter |
For example, for 27p enter: |
| 2 | 7 |
|
|
| Enter |
and for £2.70 enter: | 2 | 7 | 0 |