Configuration
New Ad
What is it?Pitney Bowes offers a wide variety of standard and customised meter ads that can help turn your mailpiece into a powerful promotional tool.
Your meter holds up to 10 ads in total. There are 5 internal ‘standard’ ads and a maximum of 5 ‘custom’ ads which can be made to your own requirements.
The two kinds of ads are loaded in different ways. This section explains how to load your own ‘custom’ ads using an Ad Smartcard.
‘Standard’ ads can be purchased and ‘enabled’ by entering a code supplied by Pitney Bowes. To enable an ad via a code, see “Enable Features” on page
Where is it? In the Meter Graphics Menu.
Select Options > Setup Menu > Meter Graphics > New Ad
Action…If your meter already has 10 ads loaded, the display prompts you to delete an ad:
Key in the number next to the ad you want to delete. The display shows the ad you selected.
Either press Enter to confirm your choice or press CE/C if you don’t want to delete this ad. The display returns to the Meter Graphics menu.
Loading an ad from a SmartcardWhen ‘New Ad’ is selected, the display prompts: “Insert card in slot.”
Place the card into the slot in the top edge of the meter. Hold the card with the gold, oval shaped microprocessor facing you and near the bottom. Push the card down as far as it will go.
The cursor tells you that loading is in progress.
The meter will prompt you when installation is complete.
Remove the card and store it safely in case you need to reuse it in the future.