Problems?

6 Blinks—Circulation valve home position sensor

Call the National Service Centre. See page 6-1.

7 Blinks—Carriage home position sensor

Call the National Service Centre. See page 6-1.

8 Blinks—Home position error

Call the National Service Centre. See page 6-1.

9 Blinks—Fan error

Call the National Service Centre. See page 6-1.

10 Blinks—Serial communications error

You may need to replace the print head. Call the National Service Centre. See page 6-1.

11 Blinks—Print head not installed

Problems with the print head. If this error continues, call the National Service Centre. See page 6-1.

12 Blinks—Ink sensor error

Call the National Service Centre. See page 6-1.

13 Blinks—Jam in stand-alone mode

Remove envelope and restart machine.

14 Blinks—Skew in stand-alone mode

Remove envelope; then reset meter by turning meter release lever to the Remove position, waiting a moment or two, then turning it back to Operate .

15 Blinks—EEPROM failure

Call the National Service Centre. See page 6-1.

16 Blinks—Motor Drive IC error

Call the National Service Centre. See page 6-1.

17 Blinks—Meter serial communication error

Make sure the Postage Meter is installed properly onto the Mailing Machine. Restart machine. If error recurs, call the National Service Centre. See page 6-1.

18 Blinks—Print head drive voltage error

Call the National Service Centre. See page 6-1.

6-13