Maintenance
Maintaining the Moistener (continued)
Removing and Cleaning the Brush
1.Lift the brush holder up.
2. Slide the brush out towards the front of the moistener tank.
3. Clean the brush in a mild soap solution. Rinse thoroughly in plain water.
Reinstalling the Brush
1.Position the brush as shown in the
top illustration so the brush’s bottom edge is under the mounting tabs.
2.Slide the brush back towards the rear of the moistener tank.
3. Close the brush holder, press down on it firmly, and reinstall the moistener tank (see next page).
Removing and Cleaning the Moistener
Wick
1.Open the brush holder.
2. Press down on the wick assembly; lift it up and out of the moistener (A).
3.Slide the wick out of the holder (B).
4.Clean the wick in a mild soap solution. Rinse thoroughly in plain water.
Reinstalling the Wick
1. Place the wick in the holder (B).
2. Reinstall the wick assembly (A).
3.Close the brush holder, press down on it firmly, and install the moistener tank.