Problems?

Tape Feeding Problems

Improper Loading (DM300 only)

Load tape strips print side up and guide them all the way into the feeder—push them in as far as they’ll go.

HINT: Always remove remaining tape strips before you add a new stack.

Tape or Paper Fragments in Feeder (DM300 only)

Clean tape strip feeder:

1.Remove the moistener (see page 5-1).

2.Slide the tape strip feeder cover to the left and remove.

Slide cover to left

3.Remove the tapes. Inspect the feeder and clean out any debris. Push down on the spring-loaded pressure plate and remove any paper from under the feed roller or tape guide.

4.Slide the tape strip feeder cover back into position.

5.Reinstall the moistener (see page 5-3).

6.Load tape strips and resume normal operation.

Pressure plate

Tape guide

Feed roller

6-3