Configuration
New Town Circle
What is it? | Use this function to load new Town Circle information into |
| your meter. There may be an occasion, such as if you |
| change address, when Pitney Bowes will supply you with |
| an update Town Circle Smartcard. |
Where is it? | In the Meter Graphics Menu. |
| Select Options > Setup Menu > Meter Graphics > |
| New Town Circle |
Action… | The display prompts: “Insert card in slot.” |
| Place the card into the slot in the top edge of the meter. |
| Hold the card with the gold, oval shaped microprocessor |
| facing you and near the bottom. Push the card down as far |
| as it will go. |
| The cursor tells you that loading is in progress. |
| The meter will prompt you when installation is complete. |
| Remove the card and take a test print at zero value. |
| If the new town circle print is OK, return the Smartcard to |
| Pitney Bowes. |
Advanced Functions
What is it? | Select this to bring up a |
Where is it? | In the Setup Menu. |
| Select Options > Setup Menu > Advanced Functions |
Action… | Allows you to select one of the following options: |
Enable Features
Scale/Printer Cfg
Replace Print Head
Tape Calibration