Maintenance

Reinstalling the Moistener

1.Line up the yellow tab with the yellow slot.

2. Slide the moistener tank into position on the Mailing Machine until the release lever snaps into position.

3. Resume operation.

Loading the Tape Strip Feeder

The tape strip feeder is only fitted to the DM300 system.

To load the tape feeder:

1.Remove any tape strips already in

the feeder by pulling them straight out.

2.Load the new tape strips print side (white surface) UP.

Take up to a maximum of 50 strips and push them into the feeder as far as they’ll go.

You’ll feel a slight resistance before they’re all the way in.

See page 2-7 for instructions on printing tape strips.

If a tape strip jams in the feeder, see the troubleshooting instructions in Chapter 6.

5-3