Polar RC3 GPS user manual Bike Settings, Method

ENGLISH

select Miles per hour or Minutes per mile.

•Automatic lap is set off as default. Press START and Set distance is displayed. Set the distance in kilometers or in miles and confirm with START . Automatic lap set to x.x km is displayed. After this, you can select to have the Automatic lap Off or On.

•Show in pre-training mode? Select YES, and Sport shown in pre-training mode is displayed. When you press START in time mode, the sport will be visible in the list of sports in pre-training mode. Select No and Sport not shown in pre-training mode is displayed.

•Training view numbering : Select On or Off. If you set the Training view numbering On , the number of the training view appears for a few seconds when you browse the training views with UP/DOWN.

•Training view: Select 3 rows or 2 rows. The training information will be displayed on three or two rows according to your selection.

Bike Settings

To view or modify bike settings, select MENU > Settings > Sport profiles > Cycling (Bike1)/Cycling2 (Bike 2)

>Bike 1 settings/Bike 2 settings

•Speed sensor: Select Off or Search new. If you have already paired one speed sensor, the option On is also visible.

•Wheel size: Set the wheel size to xxxx mm. For more information on measuring the wheel size, see Measuring Wheel Size.

•Cadence sensor: Select Off or Search new. If you have already paired one cadence sensor, the option On is also visible.

•Autostart: Set Off or On. If you select On, Activate speed sensor YES/NO is displayed. Select YES and

Autostart on is displayed. If you have not paired a speed sensor with your training computer, Speed sensor for bike required is displayed and the training computer returns to Bike 1 settings/Bike 2 settings. If you select NO, Activation canceled is displayed.

All new sensors must be paired with the training computer before they can be activated.

For more information on pairing a new sensor to the training computer, see New Accessory (page 38).

Measuring Wheel Size

Select MENU > Settings > Sport profiles > Cycling (Bike 1)/Cycling 2 (Bike 2) > Bike 1 settings > Wheel size > Set wheel size

Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining the wheel size of your bike:

Method 1

Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in millimeters in the right column of the chart.

ETRTO	Wheel size diameter (inches)	Wheel size setting (mm)
25-559	26 x 1.0	1884
23-571	650 x 23C	1909
35-559	26 x 1.50	1947
37-622	700 x 35C	1958
47-559	26 x 1.95	2022
20-622	700 x 20C	2051
52-559	26 x 2.0	2054
23-622	700 x 23C	2070

30Settings