Polycom 560 manual Using Text Messaging

Using the Advanced Features of Your SoundPoint IP® 560 Phone

This places the original call on hold and refreshes the soft key labels as indicated in the following figure.

If more than two call appearances are in use, two will appear on the display and the total number will be indicated by a counter at the bottom right corner of the display. For example “2/3” indicates that the highlighted call is the second one out of a total of three.

You can also place another outbound call on the same first line. Press

during the first call and press the NewCall soft key to obtain dial tone for a second call.

Using Text Messaging

You can send and receive text messages using your phone. SIP Instant (Text) Messaging is supported in real-time. Received messages will be indicated by a flashing Message Waiting Indicator LED on the front of the phone and optionally a visual notification on the graphic display.

To read text messages:

1.Do one of the following steps:

—Press . Select Instant Messages.

Note	Screen options may vary with your application. Voice Mail may be accessible with a
	single key press. Contact your system administrator about this option.

4 - 3