Do one of the following steps | Polycom 560 specification

Using the Basic Features of Your SoundPoint IP® 560 Phone

To place a call using the handset:

1.Do the following steps in any order:

—Pick up the handset.

—Dial the desired number using the dial pad.

Note	You can also dial using the SIP URL or IP address. To obtain the IP address of your
	phone, press followed by followed by Status > Platform > Phone. The IP address is
	listed together with other phone information. For example, 10.3.0.42, sip:
	jane@polycom.com.
	Press the Name soft key and enter the URL or IP address. Use * for “.” and # for
	“@”. Then press the Send soft key to complete the call.
	Support for SIP URL or IP address calling may be disabled. Contact your system
	administrator.

	To place a call using Hands-Free Speakerphone mode:
Note
Note	If “Handsfree mode disabled” appears on the graphic display after you press the
	speakerphone key, your system administrator has disabled the speakerphone on
	your phone.

1.Do one of the following steps:

a With the handset on-hook, press	,	, or the
NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.

bWith the handset on-hook, dial the desired number using the dial pad.

Press

, or the Dial soft key.

To place a call using the headset:

1.Do one of the following steps:

3 - 3