RAD Data comm RIC-E1 operation manual Multicast Forwarding, Figure D-17. Multicast IP Menu

Appendix D		IR-IP Interface Module	RIC-E1Installation and Operation Manual
	IR_IP	<IR-IP>	S/W Ver. 1.21 31/IR (date)
	Quick Setup
	Management Access
	Advanced Setup
	.....................................................................
	Device identification
	Interface Parameters
	Protocol Parameters
	Multicast IP
	=====================================================================
	1. Multicast forwarding		:[ Disable ]
	2. Static groups		:>>>
	Press one of the numbers to select or ESC:

Figure D-17. Multicast IP Menu

Multicast Forwarding

Used to control the forwarding of IP multicast frames. The following selections are available:

•DISABLED – Disables multicast forwarding in both directions.

•LAN to WAN – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the LAN to the WAN.

•WAN to LAN – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the WAN to the LAN.

•BIDIRECTIONAL – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, in both directions.

•WAN to LAN + IGMP – Enables forwarding of IP multicast frames addressed to groups appearing in the Static Multicast Groups table, from the WAN to the LAN. In addition, more groups can be added dynamically (the additional can be viewed using the View menu – Figure D-22).

•TRANSPARENT – All the IP multicast frames are forwarded, irrespective of the Static Multicast Groups table.

D-22 Advanced Setup Menu

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com